Worked Wood

Four-Drawer Wooden Chest

Materials: Cherry, Ash, and Walnut

This four-drawer wooden chest is constructed with a solid wood outer case featuring mitered corners and a beveled front edge that frames the drawer faces. The drawer fronts are cut to display a continuous vertical wood grain from the top drawer down to the bottom. Each drawer is fitted with a sculpted walnut pull. The drawer boxes are built using ash dovetail joinery.  The drawers include movable dividers, and one drawer has a secret bottom.

Wooden Box with Removable Tray

Materials: Walnut, Maple, Cherry

Constructed using contrasting light and dark woods. The dark wood end panels extend below the base, featuring a gentle arch along the bottom edge to form integrated feet. The front and back panels are made from maple. The center panel of the lid is cheerry set within a dark walnut frame. Inside, the box contains a shallow, removable light-wood tray displaying visible box joints at its corners. The tray rests securely on maple runners mounted to the interior end walls.

Handcrafted Heirloom Keepsake Box

Materials: Maple, Walnut

This keepsake box celebrates the natural beauty and striking contrast of fine hardwoods. The exterior showcases a continuous, flowing grain pattern, joined with mitered corners and reinforced by dark, contrasting walnut splines. Inside, the box reveals a hidden layer of artistry: a fitted, three-compartment tray featuring a delicate, laser-engraved sunburst mandala. Beneath the tray, a dark, carved wooden half-sun motif is seamlessly integrated into the inner wall. 

Wooden Box with Hidden Compartments

Materials: Mahogany and Cedar

Constructed from Mahogany and cedar woods. The end panels extend slightly beyond the front and back faces and continue below the main body to form integrated feet. The joinery is secured with visible wood pegs running vertically along the outer edges of the end panels. It features a solid, slightly overhanging lid. Inside, the box contains a secondary wood liner. This inner liner is fully removable to allow access to a concealed space beneath it. Additionally, the underside of the lid houses a hidden compartment that is secured in place using embedded magnets.

Maple and Cherry Box with Acrylic Accents

Materials: Maple, Cherry, and Colored Acrylic 

These elongated rectangular boxes are constructed primarily of light-colored maple, displaying natural grain patterns across the front, lid, and interior. The end panels are built from warmer cherry wood, bisected by a vertical band of translucent color acrylic. These composite end blocks extend slightly below the main maple body to function as integrated feet. The solid maple lid opens on a hinge and features a seamlessly raised, curved tab at the center of the front edge to serve as a finger pull.

Wooden Box with Carved Eagle Lid

Materials: Cherry

Cherry wood box displaying horizontal wrap-around grain, mitered corners reinforced with small, light-colored wooden pins visible near the front edges. The piece is finished with a completely removable lid bordered by a distinct, raised outer edge. Centered on the lid's surface is a relief carving of an eagle with outstretched wings.

Patterned Wooden Box with Exposed Joinery

Materials: Birch Ply wood

Small box featuring repeating, etched geometric patterns across all exterior faces. A central feature of the design is the use of thick, dark wood clips that act as prominent, exposed joinery. These dark accents wrap around the outer corners of the case, span the edges of the completely removable lid to help seat it in place, and extend from the bottom edges to serve as structural feet.  With the lid on, the boxes have the appearance of a completely closed form. The interior of the box is remains clear, leaving the square pegs of the dark corner joinery visible, while others versioins the interior is lined in black velvet.

Geometric Patterned Wooden Box

Materials: Maple and Cherry

This rectangular wood box features a repeating hexagonal honeycomb pattern across its exterior walls. The design is created using contrasting cherry for geometric shapes against lighter maple background. The piece is topped with a solid maple lid which operates on a pivot hinge.

Wooden Drawer Box with Abalone Inlay

Materials: Walnut, Maple, Abalone monogram Inlay 

This small box features a single pull-out drawer rather than a hinged lid. The outer case and flush-fitting drawer front are constructed from a dark walnut wood with a straight grain pattern. The top surface is detailed with a diamond-shaped monogram inlaid with iridescent abalone. The sliding drawer box is made from a contrasting light maple wood and utilizes visible finger joints where the side panels connect to the walnut front. Inside, the drawer is separated into two narrow compartments by a central wooden divider.

Wooden Drawer Box with Maple Inlay

Materials: Walnut, Maple, monogram Inlay 

This small box features a single pull-out drawer rather than a hinged lid. The outer case and flush-fitting drawer front are constructed from a dark walnut wood with a straight grain pattern. The top surface is detailed with a sun-burst monogram inlay. The sliding drawer box is made from a contrasting light maple wood and utilizes visible finger joints where the side panels connect to the walnut front. Inside, the drawer is separated into two narrow compartments by a central wooden divider.

Wooden Box with Monogram

Materials: Maple and Walnut

This small, rectangular wooden box features rounded exterior edges and a continuous horizontal wood grain that aligns across the seam between the lid and base. The top is detailed with a custom circular monogram in walnut. The box opens on small rear hinges to reveal interior top and bottom panels of walnut. Magnets are to secure the lid when closed.

Custom Match Box Cases

From ordinary to special

Custom Walnut Frame (light box) for Awesome Radiant Maps 

Radiant Maps makes super cool and hyper-detailed LED-backlit installation maps in the best color temperatures, details down to 1/160th of an inch.  See their videos on Instagram.

Custom Nintendo Switch Game Box

Wooden Desk Valet with Wolf Carving

Materials: Mahogany

This desk valet is carved from a single piece of mahogany, showcasing a prominent horizontal grain pattern across its surface. The tray is defined by a thin, raised outer border and is divided into two recessed sections. The upper compartment consists of a narrow, elongated groove specifically designed for holding pens or pencils. The larger lower section incorporates a shallow relief carving integrated directly into the floor of the tray. This carved scene depicts a howling wolf standing on a rocky outcrop on the right, set against a background of a mountain range with moon.

Inlaid Ring Boxes & Small Boxes

Custom Inlaid Wood Plaque

Materials: Walnut and Cherry 

This plaque features a dark walnut background with a contrasting light cherry wood inlay. The inlaid design incorporates the graphic of a historic sign used in the 1920's to advertise the homes being built at Truesdale Lake in South Salem, New York. 

Wooden Bank with Antique Mailbox Door

Materials: Plywood and Antique Metal Mailbox Door

This stash box and bank is constructed from stained plywood and features a functional, upcycled antique metal mailbox door. The case is assembled using visible finger joints along all exterior edges, and the front panel is detailed with engraved geometric spiral patterns flanking the door. The door is equipped with two working combination dials, a small pull knob, and a glass window displaying the text "RAINY DAY FUNDS." A narrow drop slot is integrated directly into the top to allow coins and bills to be deposited into the interior compartment, the floor of which is lined with a soft sound dampening 

Feng Shui Bagua Tea Light Holder

Materials: Birch Plywood

Cube-shaped wood tea light holder featuring an open-work design. The structure is assembled using exposed interlocking slotted joints along the vertical corners.